Season's Greetings from Trinity NDT - Wishes for A Happy New Year to All readers of this blog.
Tuesday, December 31, 2013
Saturday, December 28, 2013
Dye Penetant Inspection - Strippable developed film (PS-91) - A new NDT product Launch at Vadodara, Gujarat, India
Dye Penetant Inspection - Strippable developed film (PS-91) - A new NDT product Launch at Vadodara, Gujarat, India
P-Met has developed a new product complimenting PMC Liquid Penetrant products; viz. PMC Flawcheck and PMC Lumincheck. The product name and its identity code are Strippable developed film (PS-91). This product was displayed in Asia Pacific Conference on Non destructive Testing held in Mumbai during 18-22 Nov. 2013.
Strippable developed film PMC PS-91
It is white colour liquid used to obtain photo film as a permanent record of defects indications.
How to use?
1. Use PMC Flawcheck liquid Dye Penetrant products or PMC Lumincheck products to detect and identify defects in the any engineering metallic parts.
2. Wait for the development of defecting the case if any.
3. If there are no defects, use of this PMC PS-91 is not required.
4. However, if defect indications are established use of PMC PS-91 (if permanent record is required) will be necessary.
S. Spray from aerosol can or spread PMC PS-91 on the engineering part where defect indications are observed.
6. Wait for liquid to be dried use of gentle air flow from the fan or use of mild hot air (temperature not more than 50deg C) will assist faster drying.
7. After film is dried remove the film gently from the edge separating it from the engineering part.
8. Indication of defects in either red colour or in yellowish green will be observed depending on use of PMC Flawcheck products are used or PMC Lumincheck products are used.
9. The strippable film can be permanently preserved by placing it in a proper record book or in plastic cover.
Precautions:
1. Shake well before use
2. Do not shake the material while application
3. Do not take internally. For industrial use only
4. Keep the container in cool storage place.
S. Do not store in sun or in hot atmosphere
6. Always make sure that nosel of aerosol can is cleaned after each use.
7. While removing the film ensure gentle process of removing of stripping the film
This product is compatible to P-Met consumable products for Dye penetrant inspection and not with any other products.
For More details contact the DPT Products Chemicals Manufacturer: M/s. P-Met hi-tech company (P) Ltd, Vadodara, Gujarat, India.
AWS CWI Welding Inspector Courses in India at Bangalore
AWS CWI Welding Inspector Certification Courses in India at Bangalore in February 2014
For details Contact : +91 98441 29439 / 99009 29439 / 9141 339994
Email: welding@trinityndt.com
Thursday, December 26, 2013
AWS CWI Welding Inspector Training Certification Courses in Bangalore, India
 |
| AWS CWI Welding Inspector Training Certification Courses in Bangalore, India |
A Great Opportunity to become Certified Welding Inspector by American Welding Society (AWS) - AWS-CWI Seminar and Certification at Bangalore, India.
Trinity NDT in association with Intertek-Moody is organizing AWS-CWI seminar and Examination in India at Bangalore from 10th Feb to 15th Feb 2014. Preparatory courses will commence from 03rd Feb 2014. For more information on AWS-CWI Welding Inspector Courses in India at Trinity NDT, email us your request to : welding@trinityndt.com or call +91 98441 29439 / 99009 29439 / 9141 339994 Visit: www.trinityndt.com
Tuesday, December 24, 2013
Greetings for A Happy Christmas ...May God Bless Everyone...from Trinity NDT
Greetings for A Happy Christmas ...May God Bless Everyone...from Trinity NDT
Sunday, December 22, 2013
Ultrasonic testing Level II training courses at steel plant for QA/QC personnel
Ultrasonic testing Level II training course participants at steel plant for QA/QC personnel
Trinity NDT organized Ultrasonic testing Level II training courses at steel plant for QC personnel of the plant recently. The training has been taken up by our trainer Mr Shiva Kumar. R. The training course just completed on 21 st December 2013. Snap shots of the program are here. For more information on upcoming training courses and inquiries to conduct the program at the client location visit: www.trinityndt.com or call: +91 98441 29439 / 91 41 339994Monday, December 16, 2013
Welding Inspector Exam preparatory courses tentatively from 03rd February 2014 in India at Bangalore
Welding Inspector Courses Announcement for India in Bangalore
Trinity NDT is organizing Welding Inspector preparatory courses tentatively from 03rd February 2014 and the seminar with exams will be from 10th February to 15th February 2014. More details will be announced shortly. Interested candidates can contact Our Course Co-Ordinator on +91 9141 339994 / 98441 29439 or email: welding@trinityndt.com
Monday, December 9, 2013
Visit Trinity NDT Stall No. 22 at Defense Aerospace and Homeland Security - Defexpo 2013 to be held 12-14 Dec'2013 at Bangalore, India
Visit Trinity NDT Stall No. 22 at Defense Aerospace and Homeland Security - Defexpo 2013 to be held 12-14 Dec'2013 at Dr Prabhakar Kore Convention Centre, Near CMTI, Tumkur Road, Bangalore, India. For more about the event log on to http://msmedefexpo.in/
Sunday, December 8, 2013
Trinity NDT is Celebrating 12th Anniversary Today at Bengaluru, India
We Trinity NDTians, would like to thank and appreciate the support of every customer and training participants for their continued support and patronage.
Tuesday, December 3, 2013
Eddy current testing Level II training and certification program
Sunday, December 1, 2013
Ultrasonic Testing procedure by Trinity NDT, Bangalore, India-Twin Crystal calibration
Ultrasonic Testing procedure by Trinity NDT, Bangalore, India-Twin Crystal calibration
Calibration procedure for 25mm steel Using Dual Crystal Transducer
1. Connect probe leads to Ultrasonictesting equipment using two cables, select twin crystal Mode.
2. On the Ultrasonic testingequipment, select the test range to 10mm position and Ultrasonic test velocity inside the steel is 5920m/s to be adjusted on the equipment
3. Using Gain Control select the gain at approximately 40 dB
4. Switch Suppression (Reject) Control to off.
5. Position leading edge of Initial pulse at ‘0’ on the Ultrasonic testing machine screen grid line.
6. Apply couplant to the 'V1' block and place probe on the block. There should be no change in display since 25mm thickness of block will be outside range of the base at present.
7. Adjust the echoes such that a 2nd signal should appear to the right side of the ultrasonic equipment screen. This is 1st Back wall echo from IIW V1 block 25mm thickness
8. Using delay control adjust the initial pulse to ‘0’ on the Ultrasonic equipment screen
9. Adjust the Range and Delay controls to get the Initial pulse and BWE from 25mm thickness of the block on screen
10. Adjust delay control to move the 1st BWE to center of the screen. Second Back wall echo now will be appearing towards the right side of the Ultrasonic test equipment display.
11. Using delay control adjusts the 1st BWE to ‘0’ and using range control adjusts the 2ndBWE to the extreme right side of the screen (end of the screen). Repeat the adjustments if needed to adjust the 1st BWE to ‘0’ and 2ndBWE to the extreme right side of the screen.
12. Now using delay control bring the 1st BWE to the extreme right side of the screen. Now the distance between Initial Pulse and 1st BWE is 25mm and the total range calibrated using twin crystal is 0-25mm of steel. (Note: There may not be an Initial pulse after this calibration on the Ultrasonic equipment screen)
Saturday, November 30, 2013
Trinity NDT Celebrating 4000 Likes at Fanpage on Facebook
 |
| Trinity NDT Celebrating 4000 Likes at Fanpage on Facebook |
Monday, November 25, 2013
NAS 410, ASNT NDT Level III job vacancies in Chennai
Qualifications: NAS 410 Level II / ASNT NDT Level III in UT, MT, PT, RT with Engineering Back ground.
Candidates meeting the above criteria can e-mail us their CVs to trinityndt@gmail.com with the subject : Post Applied for TNECL3
Last Date for applying: 30th November 2013
NDT Level II Training as per ASNT RP SNT TC 1A - Schedule from 18th December 2013, Bangalore, India
NDT Level II Training Schedule from 18th December 2013, Bangalore, India
Trinity Institute of NDT Technology ( A Unit of Trinity NDT) is organizing the next NDT Level II training and certification schedule on Eddy Current testing, Ultrasonic testing, Magnetic Particle testing, Liquid Penetrant testing, Visual testing and Radiography Film Interpretation courses from 18th December 2013.
Now admissions are open for the following courses and Interested candidates can register for the courses.
1. Ultrasonic testing
2. Magnetic particle testing
3. Liquid Penetrant testing
4. Radiography Film Interpretation course
5. Visual testing
6 . Eddy current testing
For Online NDT courses registration visit website: www.trinityndt.com or call +91 98441 29439 / 9141 339994 email: training@trinityndt.com
Monday, November 18, 2013
Trinity NDT is hiring NDT Level II fresher trainees. Apply Now
Attention NDT level II fresh job Seekers !
Trinity NDT is hiring NDT Level II fresher trainees. If you have a diploma/ B.E/B.Tech with NDT level 2 certification in RT UT MT PT, good subject knowledge with proper communication skills and right attitude, zeal to hard work to achieve your goals, and if you are looking for a challenging NDT career Apply Now. Note: Applicants who have already applied for the said post need not apply.
Email us your resumes to: trinityndt@gmail.com
Please specify the post applied for 'NDT Trainee' at the subject line of the mail.
Crack Indications on Steel Forgings - Magnetic particle Inspection of forgings at Trinity NDT
Technique: Magnetic particle testing using Prod Type Technique
Current: AC - 700A at 150mm prod spacing
Particle type: Fluorescent -Magnaflux make Wet
Particle concentration: 0.3 ml /100ml
Black light intensity: 1200 microwatt/cm sq. verified by calibrated Radiometer
Type of magnetization: Circular
To know more about Trinity NDT Magnetic particle testing, training certification facilities visit: www.trinityndt.com
Celebrating 60000 blog visitors- India's Most visited NDT Blog - Thank You Visitors
Celebrating 60000 blog visitors- India's Most visited NDT Blog - Thank You Visitors
Friday, November 15, 2013
Trinity Institute of NDT Technology, India - Feedback by the NDT Level II training participants from Ghana and Qatar
"We are writing to inform the entire management and staff of Trinity NDT of our safe arrival in Ghana and want to take this opportunity thank you for all that you invested in us during our training program at Trinity NDT, it has improved our skills and hope it will have an impact on the quality of our job.
May God almighty bless you and expand your territory so that Trinity NDT may a blessing to generations to come." - AMOS AND EDDY a participant from Ghana on 13th November 2013
NDT Level II Training Feed back by the participant from Qatar:
"Thanks to all members/staff/fraternity of TRINITY NDT for conducting above courses. I Wish your NDT institute to maintain no.1 rank in India." - Mr. Kyser Farooq, from Qatar, NDT Level II training courses participant on 15th November 2013 Via Email
Trinity Institute of NDT Technology offers World class training and certification courses on Nondestructive testing-NDT as per ASNT recommended practice SNT TC 1A & Welding Inspector courses
Saturday, November 9, 2013
Thank You for NDT Training Certification Courses Participants from India, Ghana, Kenya, Cameroon, South Africa, Nigeria, Dubai and Qatar
 |
| NDT Training Certification Courses Participants from India, Ghana, Kenya, Cameroon, South Africa, Nigeria, Dubai and Qatar |
Friday, November 8, 2013
Two-Day Course on Quantitative Microscopy Under the ASM-IIM Programme Teach the Teacher at Chennai on December 12-13, 2013
Two-Day Course on
Quantitative Microscopy
Under the ASM-IIM Programme
Teach the Teacher
December 12-13, 2013
Venue:
IIT Madras
By
Prof. Arun Gokhale, FASM
School of Materials Science and Eng.
Georgia Institute of Technology, USA
Organised Jointly by
ASM International Chennai Chapter,
Indian Institute of Metals Chennai Chapter &
Dept. of Metallurgical and Materials Eng.
Indian Institute of Technology Madras
Theme and Course Description:
Microstructure controls the properties of materials to a large extent. An understanding of the microstructure-property correlations is essential for anyone dealing with materials, working in an academic institution, R&D laboratory or an industry. Quantitative evaluation of microstructure can help in quantitative prediction of properties of materials. The present course deals with not only the basic principles of quantitative microscopy but also gives the participants hands-on experience on quantifying the microstructure.
Course Content:
1. Microstructural geometry and statistical sampling of microstructures
2. Estimation of volume fraction of constituent phases in isotropic and anisotropic microstructures, and microstructures having gradients
3. Hands-on estimation of volume fraction
4. Estimation of Total Surface area per unit volume in isotropic microstructures
5. Hands-on estimation of microstructural surface area
6. Estimation of surface area in anisotropic microstructures
7. Hands-onestimation of surface area in anisotropic microstructures
8. Estimation of total length per unit volume
9. Unbiased estimation of number density in 2D and 3D microstructures
10. Topology of grain structure and grain size
11. Hands-on measurements of grain size and number density
12. Reconstruction and visualization of three-dimensional microstructures
13. Quantitative microscopy using EBSD (by Dr. V. Subramanya Sarma, IIT Madras).
About Prof. Gokhale:
Prof. Arun Gokhale received his BTech (1970) and MTech (1972) in Metallurgical Engineering from Indian Institute of Technology, Kanpur, and PhD (1977) in Materials Science from University of Florida. He is internationally renowned for his contributions in the development and applications of quantitative metallography, stereology, and digital image processing for mathematical representation of materials and biological microstructures; modeling and simulations of microstructures for materials design, and applications of quantitative fractography for characterization of fracture. He received 2013 Henry Clifton Sorby award of International Metallography Society, which is a life-time-achievement award for contributions in the field of metallurgy. He is a Fellow of ASM International. He has written chapters in ASM Metals Handbook Vol. 9 (Failure Analysis and Prevention, 2002 edition), and Vol. 11 (Metallography and Microstructures, 2004 edition).
To Whom the Course would be Useful:
This programme is highly beneficial for the faculty members of various institutions teaching courses related to metallurgy and materials science, engineers in industry involved in design, development and quality control of materials and researchers in R&D labs involved in the study of microstructure-property correlations.
Registration Fee:
Students: Rs. 2000/-
Faculty Members: Rs. 3000/-
Participants from Industry and R&D Labs: Rs. 4000/-
(More than three participants from an organization can avail 20% concession. Those who pay full registration fee will be given free membership of IIM for one year.)
The total number of participants will be restricted to 30. Hence the participation would be on a first-cum-first-serve basis.
DD/Cheque should be in favour of “Indian Institute of Metals Chennai Chapter” payable at Chennai.
The filled-in registration forms can be sent to:
Prof. B.S. Murty
Department of Metallurgical and Materials engineering
Indian Institute of Technology Madras
Chennai 600036
E-mail: murty@iitm.ac.in, murty.iitm@gmail.com
Phone: 044-22574754, 09444077006
Subscribe to:
Posts (Atom)