Saturday, December 28, 2013

Dye Penetant Inspection - Strippable developed film (PS-91) - A new NDT product Launch at Vadodara, Gujarat, India

Dye Penetant Inspection - Strippable developed film (PS-91) - A new NDT product Launch at Vadodara, Gujarat, India


P-Met has developed a new product complimenting PMC Liquid Penetrant products; viz. PMC Flawcheck and PMC Lumincheck. The product name and its identity code are Strippable developed film (PS-91). This product was displayed in Asia Pacific Conference on Non destructive Testing held in Mumbai during 18-22 Nov. 2013.


Strippable developed film PMC PS-91


It is white colour liquid used to obtain photo film as a permanent record of defects indications.


How to use?


1. Use PMC Flawcheck liquid Dye Penetrant products or PMC Lumincheck products to detect and identify defects in the any engineering metallic parts.


2. Wait for the development of defecting the case if any.


3. If there are no defects, use of this PMC PS-91 is not required.


4. However, if defect indications are established use of PMC PS-91 (if permanent record is required) will be necessary.


S. Spray from aerosol can or spread PMC PS-91 on the engineering part where defect indications are observed.


6. Wait for liquid to be dried use of gentle air flow from the fan or use of mild hot air (temperature not more than 50deg C) will assist faster drying.


7. After film is dried remove the film gently from the edge separating it from the engineering part.


8. Indication of defects in either red colour or in yellowish green will be observed depending on use of PMC Flawcheck products are used or PMC Lumincheck products are used.


9. The strippable film can be permanently preserved by placing it in a proper record book or in plastic cover.


Precautions:


1. Shake well before use


2. Do not shake the material while application


3. Do not take internally. For industrial use only


4. Keep the container in cool storage place.


S. Do not store in sun or in hot atmosphere


6. Always make sure that nosel of aerosol can is cleaned after each use.


7. While removing the film ensure gentle process of removing of stripping the film


This product is compatible to P-Met consumable products for Dye penetrant inspection and not with any other products.


For More details contact the DPT Products Chemicals Manufacturer: M/s. P-Met hi-tech company (P) Ltd, Vadodara, Gujarat, India.

No comments:

Post a Comment