3000+ Likes for Trinity NDT Facebook fan page in Record time.!

3000+ Likes for Trinity NDT Facebook fan page in Record time.!

'Like' the page at: www.facebook.com/trinityndt.in to become our next fan..!

Nondestructive testing Level II certification as per ASNT SNT TC 1A by Trinity Institute of NDT Technology in India and Nigeria

Nondestructive testing Level II certification as per ASNT SNT TC 1A by Trinity Institute of NDT Technology in India and Nigeria.

Following courses are organized continuously for the convenience of the participants in India from 23rd October 2013.
1. Eddy Current testing Level II
2. Ultrasonic testing Level II
3. Radiography testing Level II
4. Magnetic particle testing Level II
5. Liquid Dye penetrant testing Level II
6. Visual testing Level II

For details Log on to : www.trinityndt.com or call us on +91 98441 29439 / 9141 339994

Visual testing-VT Level II training certification Courses by Trinity Institute of NDT Technology in Nigeria

Visual testing-VT Level II training certification Courses by Trinity Institute of NDT Technology in Nigeria

Participants during Trinity NDT Radiographic Film Interpretation Course held at Port Harcourt, Nigeria

Participants during practical sessions at Trinity NDT Radiographic Film Interpretation Course held at Trinity NDT Training center, Port Harcourt, Nigeria in September 2013

Seminar on Advances in digital x-ray imaging on 22nd October, 2013 at Bangalore, Karnataka

Seminar on Advances in digital x-ray imaging

Indian Society For Nondestructive Testing Digital Radiography Working Group (DRWG)

Seminar on Advances in Digital x-ray imaging

22nd October, 2013

Venue:
John F Welch Technology Center
122, EPIP, Whitefield Road
Bangalore, Karnataka

Background

Digital radiography applications are growing in the field of non-destructive evaluation. It offers many advantages over film radiography. Demand to meet high productivity and need for reducing plant shutdown time have forced industries to look for alternative NDE technologies which can reduce inspection cycle time. Digital radiography offers easier work flow environment as compared to conventional film based radiography. Digital Detectors Arrays (DDA) and Computed Radiography (CR) has been implemented by many industries and research establishments such as BHEL, IGCAR, BARC, NFC, Thermax, and L&T over the years. This seminar is intended to bring all the industries, manufacturers of digital systems and research institutes together and discuss on benefits and challenges faced by industries in implementing digital radiography in shop floors.
Agenda
9:00 – 11:00 DRWG meeting
11:00- 13:00 Industries experience of Digital Radiography
(L&T, IGCAR, BARC, BHEL, ISRO)
14:00-15:00 Advances in digital x-ray imaging
15:00 -16:00 Micro/Nano CT and its applications
16:00-17:00 Visit to Nano CT lab
17:00-18:00 Panel meeting: Directions for DRWG

Speakers from
• Indira Gandhi Center for Atomic Research, Kalpakkam
• GE Global Research Center , Bangalore
• Indian Space Research Organization
• Bhabha Atomic Research Center
• L&T 

Convener 

Shri.V.Manoharan Senior Technologist NDE Imaging & Modeling Lab GE Global Research Center 122, EPIP, White Field Road Bangalore – 560 066 Email: manoharan.v@ge.com

National Seminar on “Emerging Trends in Materials and Processing Technologies” September 26-28, 2013 Bangalore, India

National Seminar on “Emerging Trends in Materials and Processing Technologies” September 26-28, 2013 Bangalore, India

Seminar
 
The seminar brings together experts from industry, government, defence, academia, research and end users to examine and discuss new advances in manufacturing sciences and technology that would have maximum impact on end-user industry, such as, Aerospace, Automobile, Power sector, etc. In the present global economic scenario, advances in manufacturing sciences and technology are expected to contribute significantly to global economic revival and its sustainability. Keeping this in mind as well as the interest of researchers and the industry, the Bangalore Chapter of IIM is organizing a two-day seminar and one day Techmart session entitled “Emerging Trends in Materials and Processing Technologies". This seminar provides a forum, wherein researchers, metallurgical industry representatives, equipment manufacturers and end-users can meet and discover current trends and future opportunities in the manufacturing sciences & technology.

Objectives:

• To provide a forum to facilitate interaction between the R&D and industry experts together with the captains of industry and metallurgical equipment manufacturers.

• To disseminate current state of art practices and learn about the future trends in the industry which would make it complete in the future.

• To identify potential research and opportunity areas for researchers and industry.

• To learn about how the Indian companies are standing up to the global challenges of future.

•  To network for better future benefits.

IIM-BC also invites manufacturers and technology providers to make presentations about their equipment, processes and capabilities to a large gathering of leaders and decision makers of the Indian industry, senior executives from PSUs, Government factories, Defence establishments, R&D Establishments and Entrepreneurs from all over India who a re p o t e n t i a l t a ke r s o f t h e t e c h n o l o g y a n d exhibits. Interested manufacturers should mail to iimbangalorechapter@gmail.com

Invited talks would be given by eminent professionals and experts in the fields. Further, there would be one session each dedicated to :
1. Emerging Materials and Technologies
2. Modern Heat Treatment practices
3. Advances in Ceramic Materials
A special poster session is being organised exclusively for students for which papers are invited.

Who should participate?
From professional organizations - Engineers, Scientists and Researchers from R&D organizations, Defence establishments, Research laboratories and Industry. From academic institutions: Researchers, Faculty members and Students. Entrepreneurs, Engineers and Managers of Industrial Enterprises.

Organiser
The Indian Institute of Metals - Bangalore Chapter (IIM-BC)
The Indian Institute of Metals was conceived in 1945 and currently the membership exceeds Ten Thousand with Fifty Two chapters across the country. Most of the nation's outstanding metallurgists and materials engineers have been associated with IIM in various capacities. The Bangalore Chapter– located in the Indian Institute of Science (IISc) is one of the leading Chapters of IIM. The Department of Materials Engineering, IISc, is in close association with IIM Bangalore Chapter in all its technical activities supporting metallurgists’ fraternity. Meeting its endeavour IIM-BC organizes many events like Workshops, Seminars including the prestigious Professor Brahm Prakash Memorial and Diamond Jubilee Lectures. It provides a platform for dissemination of knowledge and support to the industries. Further, it provides a bridge between academia and industry. Complementing its efforts, ASM International Bangalore Chapter and Indian Ceramic Society Bangalore Chapter have joined hands with IIM in this event.

Co-sponsor
ASM International is a worldwide society that has served Materials Science and Technology for almost 100 years with chapters all over the world with a commitment to learning and education, emerging technologies and connecting the global materials community. ASM Bangalore Chapter believes in serving professionals and managers by providing High quality material information, education and training, networking opportunities and professional development resources in cost-effective and user-friendly formats.

Co-sponsor
The Indian Ceramic Society Bangalore Chapter
The Indian Ceramic Society (InCerS), a non-profit organization, was established in 1928 with the blessings and active support of Pandit Madan Mohan Malaviya, the main architect for establishing the Banaras Hindu University (BHU), Varanasi. During these eighty-five years of its existence, the InCerS has grown from strength to strength under the guidance, patronage and leadership of several leading educationists, scientists, technologists and industrialists of the country who served the society in different capacities. The InCerS provides members, subscribers with access to periodicals & books, meetings & expositions, technical information.

Seminar Organizing Committee:
Prof. Govind S. Gupta, Dept. of Materials Engineering, IISc
Prof. Kamanio Chattopadhyay, President-Elect, IIM
Dr. Suryasarathi Bose, Dept. of Materials Engineering, IISc. (Convener)
Prof. Vikram Jayaram, Dept. of Materials Engineering, IISc
Prof. S. Subramanian, Dept. of Materials Engineering, IISc
Prof. Satyam Suwas, Dept. of Materials Engineering, IISc
Dr. Chandan Srivastava, Dept. of Materials Engineering, IISc
Dr. B. Ashok, ADA
Mr. V. Babu Sathian, M/s Process Pumps (I) Pvt. Ltd.
Mr. A. Selvaraj, AGM, HAL
Dr. R. Raghavendra Bhat, HAL (F&F)
Mr. Rahul Masurekar, ASM International
Mr. S. Venkataramana Bhat, ASM International
Mr. L.M. Kota, ASM International
Dr. U.S. Mallikarjun, Siddaganga Institute of Technology
Prof. E. S. Dwarakadasa, Karnataka Hybrid Micro Devices Limited
Dr. P. Raghothama Rao, S.J.C. Institute of Technology
Dr. H. Sundaramurthy, M/s. Fenfe Metallurgicals
Mr. T. Ravi Kumar, M/s.Trinity NDT Engineers
Mr. R. Shiva Kumar, M/s.Trinity NDT Engineers

Techmart Sessions
A limited number of 30 minute sessions are available on nominal chargeable basis for manufacturers to make product presentations on 28th September 2013. This is a rare opportunity for manufacturers to make presentations about their equipments, processes and capabilities to a large gathering of leaders and decision makers of the Indian industry, senior executives from PSUs, Government factories, Defence establishments, R&D Establishments and Entrepreneurs from all over India. Interested manufacturers should mail to : The opportunity of presentation is for a limited number of
manufacturers purely on a FIRST-COME-FIRST-SERVED basis.

For any queries, please contact:
The Convener – MetEx India 2013 Seminar
Indian Institute of Metals, Bangalore Chapter,
C/o. Dept. of Materials Engineering,
Indian Institute of Science, Bangalore- 560012
Phone (O): +91-80-22933407; Mobile: 9964973180
E-mail : iimbangalorechapter@gmail.com

Electromagnetic - Eddy Current testing Level II training & certification courses starts on 04th October 2013 at Trinity NDT, India

Trinity NDT Eddy Current Inspection/testing Facility and Equipment

Eddy Current training Schedule at Trinity NDT Bangalore India

NDT allows parts and materials to be inspected and measured without damaging them. Because it allows inspection without interfering with a product's final use, NDT provides an excellent balance between quality control and cost-effectiveness. 

Introduction to Eddy Current testing

Eddycurrent inspection is one of several NDT methods that use the principal of “electromagnetism” as the basis for conducting examinations. Eddy currents are created through a process called electromagnetic induction. When alternating current is applied to the conductor, such as copper wire, a magnetic field develops in and around the conductor. If another electrical conductor is brought into the close proximity to this changing magnetic field, current will be induced in this second conductor

Eddy Current testingApplications

·            Crack detection

·            Material thickness  measurements

·            Coating thickness measurements

·            Conductivity measurements

Eddy Current Testing - Level II

Training course objectives

1.      Describe the basic principles of the eddy current test method

2.      List several applications of the eddy current test method

3.      List the types of discontinuities detected with the eddy current test method

4.      Describe the cause and effect of various types of discontinuities

5.      Describe the operational steps in the eddy current test and understand the importance of each step following a written procedure

6.      Interpret and evaluate the test results with respect to the applicable standards

7.      Complete the required test reports, and prepare a clear and concise written instruction (Procedure)

8.      Locate defects in various materials, components and structures with a high probability of detection

Level II Course Outline

Electromagnetic Testing

1.      Fundamentals

2.      Electromagnetic field generation

3.      Properties of eddy current

4.      Effects of varying frequency

5.      Phase discrimination

6.      Sensors Electromagnetic testing

7.      Basic types of equipment; types of read out

8.      Reference standards

9.      Applications and test result interpretation

10.   Flaw detection

11.   Conductivity and permeability sorting

12.   Thickness gauging

13.   Process control

ET Level II Practical Training

Setting up the Instrument, Selection of Frequencies for Tube Inspection, Selection of Probe Size, Calibrations, Depth Curve, Data Acquisition, Test on Various Samples, Prepare test report 

ET Training Brochure: Download

For more details contact us on +91 98441 29439 / 9141 339994 / 99009 29439 Email: training@trinityndt.com

  For

NDT RT Level II Jobs Vacancies in Bangalore, India

NDT Level II Jobs Vacancies in Bangalore, India

NDTLEVEL 2 JOB DESCRIPTIONS:

1.   Maintains Level II certification to ASNT/ BARC Radiographic Inspectionsmethods.

2.   Knowledge of Inspection techniques in Petrochemical/Oil and Gas and Industrial sector

3.  Conduct analogue/digital radiography - and interpret tests results.

4.  Establish techniques for proper examination of objects under inspection, ensuring strict adherence to safety regulations in addition to equipment calibration.

5.   Apply testing criteria in accordance with applicable specifications or standards and evaluate results.

6.  Experience in pipeline NDT testing

7.  Performs radiographic inspection on composite structures and assemblies and prepares electronic reports of findings.

8. Develops and documents NDT techniques.
9. Complies and understands test procedures including the review of referenced or related codes, specifications, standards and quality assurance instructions.
10. Understand the scope and limitations of methods used.

   11.Maintains accurate daily labor input and all other required record keeping and    

        traceability recordings. 

12  Understands and complies with safety regulations. Actively participates in Safety and Housekeeping related activities.

13. Assists in or conduct co-worker training and guidance.

14. Middle east Experience will be an added advantage.

Skill set:

1.   Graduate in science or DME with min 2 years on hand experience in radiography (knowledge of digital radiographywould be added advantage) with Level II certification in radiography.

2.   Should will to work in shifts.

3.   Should be willing to travel to customer place.

Candidates meeting the above requirements ONLY can  email their resumes to : trinityndt@gmail.com with the subject line " Post Applied for RT Level II"so as to reach us by 17th September 2013.

Happy Onam Best Wishes to the People of Kerala, India

Happy Onam Best Wishes to the People of Kerala, India

Eddy Current Testing Inspection Training & Certification Courses from 04th October 2013 at Bangalore, India

Eddy Current Testing Inspection Training & Certification Courses in India from 04th October 2013 at Bangalore

TRINITY INSTITUTE OF NDT TECHNOLOGY 
( A Unit of TRINITY NDT)

EDDY CURRENT TESTING (ET)  LEVEL II TRAINING & CERTIFICATION COURSE 

as per ASNT SNT TC 1A

Venue: Trinity NDT, Peenya Indl Estate, Bangalore, India

Program Dates: 4th-09th October 2013

For more information & Registrations Contact: Course Director on +91 98441 29439, 99009 29439

E-mail: training@trinityndt.com

Last Date for Registering the Course: 25th September 2013

Following is the Outline of the Eddy Current Training and Certification program at Trinity NDT

1. NDT General Knowledge

2. Physical Principles of Eddy Current Inspection

3. Eddy Current Instrumentation

4. Eddy Current Inspection and Testing Procedures

5. Applications of Eddy current testing

6. Presentation of Eddy current test results

7. Codes, Standards and Specifications related to Eddy Current Inspection

Hands on ECT Practicals using our Latest State of Eddy current Equipments under our expert Eddy Current Level III trainers. For More information contact us on +91 98441 29439 / 9141 339994 Visit: www.trinityndt.com